New 'start' material - common Hazel

New 'start' material, Corylus Avellana or (common) Hazel.
This is new material, found and dug out during holiday weekend in Belgian Ardennes. If you read my blog you know I am not a fan of collecting trees in ecological environments. So this one (along with 2 others) I found at the very side of the road in the immediate proximity of the place we stayed, within 50m ever. These parts are mowed every few years to clear the road, either by the owners or by the local community services.

This was all done in 1 day, at 7.15 in the morning it took 1 hour to dig out the tree (a lot of rocks!). 12 hours later and back home, another half an hour to clear out the dirt and prune the roots to fit the training pot. You can see the few rocks beneath the main trunk (at least for now) that are trapped between the roots. The rock is called 'Schiste' in dutch, typical of the region.

The tree/clump is just pruned to keep it manageable. However I do want to end up with a broad canopy rather than a high one. Equally, I am not sure a prominant dominant trunk would fit the picture. Broad, bushy, natural is the first idea that comes into my mind. Fingers crossed and hope it survives the brutal habitus change.

Birch in new 'old' pot 03.04.2015

Update 03.04.2015 of my Birch #2.

At long last I did not use my selfmade cement pot for my Birch 'enfant terrible', simply because I did not find the time to finish it on time. I'll keep it in stock and make sure it's ready for usage next spring. So I put the prebonsai Birch in the old oval greenglazed pot I used up until recently for my English Oak (now back in the ground).
Will be trained as a weeping birch, obviously I need to wire and/or put guy wires on. The small secondary trunk will be lowered further, and trained equally in weeping 'style'.
The awkward trunk base is now just a little less awkward in my opinion, I put the tree a bit higher in the substrate so the roots on the right hand side produce a bit more visual counterweight. The visual stress on that bulky trunk base is a bit less. Still a a bit enfant terrible on that part, I dont mind.


Toch mijn zelfgemaakte cementpot niet gebruikt voor mijn enfant terrible van een berk (zachte berk denk ik), wegens niet op tijd afgeraakt. Dan maar in de ovale groengeglazuurde pot waar tot voor kort mijn zomereikje in stond (nu terug naar vollegrond). Wordt naar treurvorm getraind; en moet nu opnieuw bedraad en gespannen worden zoals je ziet, ook het kleine stammetje moet naar omlaag, met treurende takken dan nog. Ja die knoert van een stambasis heb ik in tegenstelling tot divers advies eigenlijk nu nog hoger op het substraat gezet, dan kwamen de wortels onderaan rechts wat meer bloot en dat gaf dan wel net weer wat tegengewicht. Blijft een beetje een enfant terrible op dat vlak hoor. Alé, groei nu maar...

how the tree looked back in 2007/2008

Just last year in spring after I cut back it back to half its size, reduced the trunk thickness to half its size and simply 'crack' the trunk to new position and then let it callus over within a good month or so (packed in wrapping foil)

bonsai Rowan and Malus repotted

The little Rowan tree (about 25 to 30cm in height) or Sorbus Aucuparia and the Malus (about 30cm) both were rootbound after good 2 years in their pots. A big carpet of roots could be pruned away after combing out the soil underneath.

The Rowan tree was in a smaller traditional rectangle pot, and is now repotted into the old Malus pot, which is about 1/3 bigger in volume. The tree needs more thickening of the trunk, which can be achieved with more room for the roots, regular feeding, and letting the shoots grow long enough before cutting back. In 2 to 3 seasons I should be able to get good results.

The Malus was in the round blueglazed pot, and was repotted in a big plastic training pot. The goal here is to achieve lots of strong new growth first. I treat it like a pre-prebonsai for 2 or 3 years. Lots of flower buds opening up too !

Silver birch bonsai top cut out

Today 10.03.2015 I got my silver birch (betaula pendula) out of winterstorage. This young prebonsai is grown from seed since 2008. It only spent 2 full growing seasons in the ground in our backyard. In pot since 3 (of 4?) years.

I cut out the entire top section because it was going nowhere. Too much space without branching, several branches coming from 1 'wheel'. All gone now. A lower branch I bent into the new top. Obviously the top will need to fill out now, I give it 2 years and I'll have plenty of shoots to pick from for building it up. I put some new guy-wires on other branches. So off to a new and better future, it allready feels much better now. The roots are starting to look decent too. It will have to wait another year for repotting, it won't hurt the tree too much.

first picture is from 2 years ago

Making a cement bonsai pot (crescent)

09.03.2015

I have an ugly-duckling birch that needed a pot. I had to do all sorts of tricks to make this tree somewhat 'ok' for a future as bonsai, and still it will always be a strange tree even with years of work still to come. So, with the knowledge I have no pots suited for the tree, and the cost of a big ceramic crescent pot is very high (can be about 200 EUR), I decided to make own. In cement.

This was my first ever attempt ever so you will not find an elaborate 'how it's made' here. I went to the local DIY, bought some bird cage wire mesh, 2 small bags of quickdrying cement, and a pair of plastic gloves. The 'creating' happened in 2 hours, then a 1 hour pause, then half an hour finishing. The bottom still needs finishing, the pot was still to delicate to turn in upside down and I got no appropriate stand at hand. The flat bottom is, well just that, too flat still.

I must say this was fun. I'm hungry for more. It was not a perfect job but I've seen worse first attempts at this so I should be proud. I will find out more about using stands or supports to be able to finish the bottom in one go.

3 more trees out of winter storage

Today 08.03.2015, three more trees left the winter storage:

Crataegus Monogyna, the common whiteflowering hawthorn which is native here in Belgium;
Sorbus Aucuparia, the rowan or mountain-ash tree, also a native species here;
Larix Kaempferi, or japanese larch.

The Crataegus got a little check-up before spring sets in. I cut back branchlets, and gave a couple of guy-wires an extra twist. Over the last 2 years it is becoming more and more promising. I still need 2 or 3 years where pruning back and ramification will have to find a balance, before the final ramification can begin and the bonsai can come out.

The Larix hadn't been pruned before or during winter so this job I did today. I cut back all twigs, and some branchlets were pruned away completely to get the canopy open enough. The 'character branch', had a part that disturbed the overall image too much, so first I shortened it and then I peeled of the bark half way. This works better now, its an eyecatchter but not too much, and the disturbing element is gone alltogether. Not a top tree, but a simple elegant and perhaps feminine tree.

The Sorbus is what I call my little gem. Not a big impressive thing, but grown from seed since 1997, of which only 2 to 3 years in the ground. The last 3 years it developed quite nicely. I am happy with this simple yet charming tree. I love all the characteristics of rowan trees. Hardly any wiring done to build up this tree.

Malus/Apple tree out of winter storage

Another one left the winter storage today, my apple tree 'stumpie'. I thought it was Malus Halliana but I doubt it now, will be checked.

Still a premature project. One of only a few prebonsai I bought (in late summer 2012), and its the most "expensive" (and I'm a fan of cheap) one too, even with the knowledge it was on 50% discount. So, I was glad to downsize my newly purchased apple tree and be left with a small sized tree with respectable trunk thickness, this was my goal. The story of this tree I allready posted (use searchbox: malus).

The edges of the carved dead wood have receded here and there due to indrought, nothing to worry about. I cut off a very big branch on top I better had removed in the first place. I am now left with 'stumpie', dead wood to finish off in the future (very hard wood that does not deteriote rapidly), and building up for years to come. Therefore I included some virtuals.

The buds are opening up right now, let the spring come.